3D Printed Gifts for Gamers: 9 Setup Upgrades With Prices

The best 3D printed gifts for gamers are parts that tidy up their setup: a game card holder, a microSD card holder, a headset hook, cable clips and labels, or a name plate with their gamertag. At Mandarin 3D the nine ideas below cost $9.24 to $15.32 each, delivered (quoted Nov 13, 2026, before tax), and each one is made to their cards, their desk or their name.

Most gamers already own the console, the controller and the headset; what they rarely have is a place for all of it. Loose game cards end up in a drawer, the headset sits on the keyboard, and four black power cables run into one strip with no way to tell them apart. Every idea here fixes one of those, and none of them needs a 3D file: you change the card count, the desk thickness or the name on the page and order.

The nine gifts and what they cost

Live quotes from our quote API on November 13, 2026, one piece each in PLA, shipped by USPS Ground Advantage anywhere in the US, before tax:

Why they're all about $9 to $15: every order has a $3.50 order fee and $5.51-$5.73 of USPS postage for a parcel this light, so the part itself is only $0.23 to $3.78. Two colors means raised letters in a second color, such as white on black; the printer switches filament once, where the letters start, so nothing is painted on.

Game card holder

The pick for anyone with a Switch or Switch 2. Each card stands in its own slot with the label showing, 12 to a row, and a second row steps up behind the first so every label stays readable. Switch 2 cards are the same size as original Switch cards, about 31 x 21 x 3.3 mm, so one holder takes both.

Doubling the slots from 12 to 24 adds $1.99. If you can, count their cards first and round up. For the full Switch 2 sizes, see our Switch 2 card holder guide.

microSD card holder

Handheld players swap microSD cards more than you'd think: a Steam Deck, a Switch 2 (which takes microSD Express cards, the same size as any microSD), a retro handheld and a drone or action camera all use them, and a 15 x 11 mm card is the easiest thing in the house to lose. This holder takes up to 16 microSD cards in 9 mm deep slots, each 0.5-0.8 mm bigger than the card so it slides out without rattling. A mixed version with 6 full-size SD slots and 8 microSD slots is $10.50.

Headset hooks

A headset on a hook instead of on the desk is a small upgrade people use every day. There are two:

• Clamp-on ($10.01): slides onto the desk edge with no screws, made to the desktop's thickness (12-45 mm). The clamp closes 1.2 mm tighter at the tips so it grips. Most desks are about 25 mm at the edge; measure while they're out of the room.
• Under-desk ($9.83): screws to the underside with two #8 or M4 wood screws (not included) and hides the headset below the edge. Better for a glass or very thick desk.

Both have a 45 mm arm by default, which fits most over-ear headsets, and also hold a controller by its grips.

Cable clips and cable labels

A console, a PC, a monitor and a router behind one desk is a lot of identical black cables. The cable clips stick to the back of the desk or TV stand with double-sided tape (not included) and hold 1 to 6 cables of 3 to 12 mm, each ring 0.6 mm bigger than the cable so it snaps in and stays. Phone chargers are usually 3-4 mm, laptop chargers 5-7 mm, HDMI about 7 mm. The cable labels are four tags with a word up to 10 characters each, "CONSOLE", "MONITOR", "PC" and "ROUTER" in our quote, each with a slot for a zip tie.

Gamertag name plate and keychain

A gamertag is a name they picked themselves, so it's the most personal text you can put on a part. The desk name plate is a 180 x 50 mm plate on a stand that leans it back 15 degrees, with the gamertag on top and a second line under it ("Player 1", a rank, a team name). Black with white letters is $15.32.

The name keychain grows with the name: "NightOwl42" makes an 88 x 22 mm tag for $9.38, or $12.45 with the letters in a second color. Any tag up to 12 characters fits: the tag stays under 88 mm and longer names get smaller letters. The letters stand 1.4 mm proud of a 3 mm tag, so they stay readable after years on a keyring.

Phone stand

For a second screen next to the monitor: a guide, a chat app or a stream. The channel is made to the phone's thickness with its case (7-18 mm), the lean is 50-80 degrees, and a slot under the port lets it charge while it stands. $13.01.

What we can't print

These are unofficial accessories with no logos or characters. We don't print a brand's logo or a character you don't own the rights to, and we don't print toys or items made mainly for children 12 and under. The full list is on prohibited items.

Materials

Everything here is quoted in PLA, which is stiff and holds fine detail. If the gift will live somewhere hot, like a car or a sunny window, pick PETG, made to order in black or white: it softens around 68 °C instead of 55-60 °C, costs 20% more on the print and adds 3 to 5 business days. Two-color letters are PLA only.

Timing for Christmas

At your door 3-5 days after you order. For Christmas, USPS recommends shipping Ground Advantage by Thursday, Dec. 17 in the lower 48 (USPS 2026 holiday dates). Order by the first week of December to have it in hand with time to wrap.

Get one printed

Open any gift above, set the card count, desk thickness or gamertag, check the 3D preview and order; the price updates as you type. For something that isn't on the list, like a controller stand, describe it in the box below and send it to the AI designer, or drop your own STL, 3MF or STEP file for an instant price. For more small gifts, see our stocking stuffers under $15.