Personalized pen holder
A rounded square cup for pens, pencils and markers with a name raised across the front.
$12.54
Delivered. Ships in 3-5 days.
Shipping $5.73
Price breakdown
- Print, PLA 57.9 g, 1 h 10 min
- $6.81
- USPS Ground Advantage
- $5.73
- Total, before tax
- $12.54
70 × 71 × 95 mm
Customize more in the AI designer: change the shape, add holes or sizes, then order the same way.
What it's for
A pen cup for a desk with a name across the front: a teacher's name for an end-of-year or holiday gift, a new hire's first desk, an office or a kid's homework table. Pens, pencils, markers, scissors and a ruler stand up in it.
The default is 70 mm square and 95 mm tall, about the size of a coffee mug, so a standard 140 mm pen sticks out by a third and is easy to grab. Go 60 mm for a small desk or 90 mm wide and 120 mm tall for markers, brushes or a craft table. Names up to about 8 characters get 10 mm capitals; longer ones shrink to fit the front, so "Ms. Rivera" prints 8.5 mm tall and 16 characters about 5 mm at the default width.
Walls are 1.6 mm with an 8 mm corner radius and a 2 mm floor. The letters stand 1 mm off the face with sloped undersides, so the whole cup prints in one piece without supports. Pick PETG (made to order in black or white) if it lives in a hot car or a sunny window.
Sizes and price
- Name
- Up to 16 characters, raised 1 mm
- Width
- 60-90 mm square, outside
- Height
- 70-120 mm, outside
- Walls
- 1.6 mm, 2 mm floor
- As shown
- 70 × 71 × 95 mm
- Material
- PLA in black, white, gray, red, blue, green; or PETG in black or white (made to order, +20%, 3 to 5 extra business days)
- Price as shown
- $12.54 delivered
- Four of them
- $23.99 delivered
Prices include USPS Ground Advantage shipping anywhere in the US; sales tax is added at checkout where required. A different size or text changes the price; the panel above shows it before you order.
Questions
What size fits a normal pen?
The default 95 mm height leaves about 45 mm of a 140 mm pen showing, enough to grab. For long pencils or brushes go 110-120 mm tall.
Can I order a set for a class or a team?
Each name is its own part. Order them one after another, or email the names to orders@mandarin3d.com and we put them in one order.
Can I add a logo or a second line?
Use Customize more and ask the AI designer for a second line or a different layout, then order the same way. We don't print logos you don't own.
More in How Small Can You 3D Print Text? Minimum Letter Height and Stroke Width and 3D Printed Stocking Stuffers Under $15: 7 Ideas With Prices.
