
Gridfinity bins
A bin on the 42 mm Gridfinity grid that drops into any standard baseplate, in the size and height you pick.
$11.30
Delivered. Ships in 3-5 days.
Shipping $5.73
Price breakdown
- Print, PLA 34.6 g, 51 min
- $5.57
- USPS Ground Advantage
- $5.73
- Total, before tax
- $11.30
83.5 × 83.5 × 24.9 mm
Up to 20 parts in one order, one shipping charge.
Customize more in the AI designer: change the shape, add holes or sizes, then order the same way.
What it's for
Gridfinity is an open storage system for drawers and desks: a baseplate with a 42 mm grid, and bins whose feet drop into it, so they stay put and can be moved around later. These bins follow the open spec, so they fit any standard Gridfinity baseplate, including the ones you already have.
Sizes are in squares and height units. A 2 x 2 bin is 83.5 mm square outside (42 mm per square, less 0.5 mm so neighbors don't jam), and 3 units is 21 mm from the bottom of the feet to the rim. The stacking lip adds 3.9 mm on top and lets another bin sit on it; leave it off for shallow drawers.
Pick 1-5 squares each way and 2-10 units tall, with 0-3 dividers across the width. Walls are 1.6 mm. Bins work loose in a drawer too; for a baseplate, upload one from any Gridfinity generator, or ask the AI designer for one sized to your drawer.
Sizes and price
- Footprint
- 1-5 x 1-5 squares, 42 mm grid
- Height
- 2-10 units of 7 mm, plus 3.9 mm lip
- Dividers
- 0-3, equal sections
- Walls
- 1.6 mm, one foot per square
- As shown
- 83.5 × 83.5 × 24.9 mm
- Material
- PLA in black, white, gray, red, blue, green; or PETG in black or white (made to order, +20%, 3 to 5 extra business days)
- Price as shown
- $11.30 delivered
- Four of them
- $17.97 delivered
Prices include USPS Ground Advantage shipping anywhere in the US; sales tax is added at checkout where required. A different size or text changes the price; the panel above shows it before you order.
Questions
Will these fit my Gridfinity baseplate?
Yes, if the baseplate follows the standard 42 mm Gridfinity spec, which nearly all do. The feet use the spec's 0.8, 1.8 and 2.15 mm profile and the bin is 0.5 mm smaller than the grid.
Do I need a baseplate?
No. Bins sit flat on a drawer floor. A baseplate keeps them from sliding; upload one from a Gridfinity generator or ask the AI designer to size one to your drawer.
Are there magnet holes?
No. The feet are solid, which prints cleaner and holds well in a baseplate. If you need magnets, use Customize more and ask for 6 x 2 mm magnet holes.
How tall should I go for my drawer?
Measure the drawer's inside height and take off 5 mm, plus the baseplate if you use one. Divide by 7 for units, and add 3.9 mm if you keep the lip. A 50 mm drawer with a 5 mm baseplate fits 5 units, with or without the lip.
More in What Is Gridfinity? Sizes, Baseplates and Bins Without a 3D Printer and Useful Household Items to 3D Print: 10 That Earn Their Keep.


