All guides

What Is Gridfinity? Sizes, Baseplates and Bins Without a 3D Printer

7 min readBy Mandarin 3D

Gridfinity is an open storage system for drawers, desks and workbenches: a baseplate with a 42 mm grid of pockets, and bins that are whole multiples of 42 mm wide and 7 mm tall, whose feet drop into the pockets and stay put. You don't need a 3D printer to use it. Our Gridfinity bins are printed in the size you pick, from $9.75 delivered for a 1 x 1 bin and $11.30 for a 2 x 2 (quoted Nov 18, 2026, before tax).

Zack Freedman introduced it in a YouTube video on April 12, 2022 and put it under the MIT license, so anyone can make and sell parts for it. That is why it spread: Printidex counted almost 30,000 Gridfinity models in its November 2026 guide, about 16,700 on Printables and 10,800 on MakerWorld, from plain bins to holders cut for one screwdriver set. They all fit each other because they share a handful of numbers.

The numbers that make it fit

These come from the open spec, collected on the Gridfinity wiki and in reference projects like gridfinity-rebuilt:

MeasureSize
Grid pitch42 mm each way
Bin outside size42 mm per square, less 0.5 mm
Height unit7 mm, from the bottom of the feet to the rim
Feet4.75 mm tall: 45 degree chamfer 0.8, straight 1.8, 45 degree chamfer 2.15
Stacking lip4.4 mm on top of the rim, not counted in the height
Outside corner radius3.75 mm on bins, 4 mm on baseplates
Magnets (optional)6 x 2 mm, four per square

The 0.5 mm is what lets two bins sit side by side without jamming. The tapered feet center each bin in its pocket, and the lip on top has the same shape as a pocket, so one bin can stand on another.

In practice that gives these sizes:

SquaresOutside sizeHeight unitsRim height
141.5 mm214 mm
283.5 mm321 mm
3125.5 mm428 mm
4167.5 mm642 mm
5209.5 mm1070 mm

So a "2 x 1 x 6" bin is 83.5 x 41.5 mm and 42 mm tall to the rim, plus the lip.

Plan a drawer in three numbers

  1. Width and depth. Measure the inside of the drawer and divide each side by 42, rounded down. A desk drawer 300 x 220 mm inside is 7 x 5 squares (294 x 210 mm), with a few millimeters left over at the edges.
  2. Height. Take the drawer's inside height, subtract 5 mm for the baseplate if you use one and 3-5 mm so the drawer closes, then divide by 7. A 50 mm drawer leaves 40-42 mm, which is 5 units (35 mm), and 5 units with the lip (38.9 mm on ours) still fits.
  3. Split it into bins. Small parts want 1 x 1 bins, pens and tools 1 x 3 or 2 x 1, chargers and tape 2 x 2. Mixing sizes is the point; you can rearrange later.

A baseplate wider than the print bed is printed in pieces that sit side by side. We print up to 320 mm per side, so most desk drawers take one or two plates.

What it costs to have printed

Live quotes from our quote API on November 18, 2026, one piece each in PLA, shipped by USPS Ground Advantage anywhere in the US, before tax. Bins have the stacking lip and 1.6 mm walls:

PartSizeWeightPrice
Bin 1 x 1 x 341.5 x 41.5 x 24.9 mm11.4 g$9.75
Bin 1 x 1 x 641.5 x 41.5 x 45.9 mm17.7 g$10.11
Bin 2 x 1 x 383.5 x 41.5 x 24.9 mm20.1 g$10.24
Bin 2 x 1 x 683.5 x 41.5 x 45.9 mm29.9 g$10.76
Bin 2 x 2 x 383.5 x 83.5 x 24.9 mm34.6 g$11.30
Bin 2 x 2 x 3 in PETG83.5 x 83.5 x 24.9 mm33.9 g$12.53
Bin 4 x 2 x 3, three dividers167.5 x 83.5 x 24.9 mm70.0 g$13.36
Bin 3 x 2 x 6, two dividers125.5 x 83.5 x 45.9 mm76.5 g$13.64
Baseplate 4 x 3168 x 126 x 5 mm17.3 g$10.12
Baseplate 5 x 4210 x 168 x 5 mm28.4 g$10.81

Most of a single bin's price is the order fee and postage, which you pay once per order. Four identical 1 x 1 bins came to $12.19 delivered, against $9.75 for one.

A whole drawer in one order

A 4 x 3 drawer filled with a 2 x 2, two 2 x 1 and four 1 x 1 bins, all 3 units tall, on a 4 x 3 baseplate: twelve squares, eight parts, $28.79 delivered in one order (quoted the same day). Every compartment is the size you chose, and the layout changes when your stuff does.

Bins, baseplates and special holders

  • Plain bins are on the Gridfinity bins page: pick 1-5 squares each way, 2-10 units tall, up to three dividers and the lip on or off, and the price updates as you change it. The feet follow the spec profile, so they fit any standard baseplate, including one you already have.
  • Baseplates for your drawer: describe the size in the box below and send it to the AI designer, or make one in a free generator such as the ones listed on the Gridfinity wiki and drop the STL for an instant price.
  • Holders cut for one thing (a socket set, SD cards, a soldering iron): upload the file. Many are free to download; check that its license lets you have it printed.

Our bins have solid feet without magnet holes, which print cleaner and hold well in a plate. Our lip is 3.9 mm rather than 4.4 mm because the knife edge at the very top is cut to a 0.5 mm flat, which doesn't change how a bin stacks: a stacked bin rests on the bottom of the lip.

PLA or PETG

PLA is right for almost every drawer: stiff, clean edges, every stocked color. It softens around 55-60 °C, so for a garage in a Florida summer, a car or a shelf in the sun, pick PETG. PETG is made to order in black or white, adds 3 to 5 business days and 20% on the print; the 2 x 2 bin above went from $11.30 to $12.53.

Timing

At your door 3-5 days after you order. A set of bins sized to someone's desk drawer also works as a gift for the person who labels everything; for Christmas, USPS recommends shipping Ground Advantage by Thursday, Dec. 17 in the lower 48 (USPS 2026 holiday dates).

Get it printed

Open the Gridfinity bins page, set the squares and the height, check the 3D preview and order. For a baseplate or a custom holder, send the box below to the AI designer or drop your own STL, 3MF or STEP file. For a drawer that doesn't fit a 42 mm grid, our drawer organizer bins are made to any size in millimeters.

Questions

What is Gridfinity?

An open storage system by Zack Freedman: a baseplate with a 42 mm grid of pockets, and bins in multiples of 42 mm wide and 7 mm tall whose feet drop into the pockets. Every part follows the same numbers, so bins from anyone fit any baseplate.

What size is one Gridfinity unit?

42 x 42 mm on the grid and 7 mm in height. A bin is 0.5 mm smaller than its grid, so a 1 x 1 bin is 41.5 mm square and a 2 x 1 is 83.5 x 41.5 mm. Height counts from the bottom of the feet to the rim; the stacking lip adds about 4 mm on top.

Can I use Gridfinity without a 3D printer?

Yes. Order printed bins and a baseplate. Mandarin 3D's Gridfinity bins quoted at $9.75 for a 1 x 1 and $11.30 for a 2 x 2, 3 units tall, delivered, on Nov 18, 2026, before tax.

Do I need a baseplate?

Not to start. Bins sit flat on a drawer floor and work like any other tray. A baseplate keeps them from sliding when the drawer opens and lets you move them around without the layout drifting.