Drawer pulls made to your hole spacing, 3D printed in PLA

Drawer pulls made to your hole spacing

A bar pull on two legs with threaded-screw pilot holes, made to the center-to-center spacing of the holes already in your drawer.

Customize
mm
mm
mm

$9.73

Delivered. Ships in 3-5 days.

Material
Color
PLA, Black

Shipping $5.51

Price breakdown
Print, PLA 11.3 g, 21 min
$4.22
USPS Ground Advantage
$5.51
Total, before tax
$9.73

124 × 32 × 12 mm

Up to 20 parts in one order, one shipping charge.

Customize more in the AI designer: change the shape, add holes or sizes, then order the same way.

What it's for

A broken pull on an old dresser or cabinet is easy to replace until you find the holes are 3-1/2 in apart and every store sells 3 and 3-3/4. Measure from the center of one screw hole to the center of the other, enter it, and the pull is made to that number, so it goes on with the holes already in the drawer and nothing to fill or drill.

Common spacings: 3 in is 76.2 mm, 3-1/2 in is 88.9 mm, 3-3/4 in is 96 mm, 4 in is 101.6 mm, 5 in is 128 mm. Projection is how far the front of the bar stands off the drawer; the bar is 9 mm thick, so a 32 mm projection leaves 23 mm for your fingers. Order as many as the piece has drawers, so they all match.

Each leg has a 3.4 mm pilot hole, 15 mm deep, for the 8-32 machine screws that hold most US pulls (M4 works too). Screws aren't included; reuse the old ones if they reach 5 to 15 mm into the pull. PLA is stiff and fine for drawers and doors; pick PETG for a bathroom, a garage or a car.

Sizes and price

Hole spacing
50-160 mm, center to center
Projection
28-45 mm
Bar
10-20 mm tall, 9 mm thick, 14 mm past each hole
Screw holes
3.4 mm pilot, 15 mm deep (8-32 or M4)
As shown
124 × 32 × 12 mm
Material
PLA in black, white, gray, red, blue, green; or PETG in black or white (made to order, +20%, 3 to 5 extra business days)
Price as shown
$9.73 delivered
Four of them
$12.11 delivered

Prices include USPS Ground Advantage shipping anywhere in the US; sales tax is added at checkout where required. A different size or text changes the price; the panel above shows it before you order.

Questions

How do I measure the hole spacing?

Pull the old handle off and measure from the center of one screw hole to the center of the other. Calipers are best; with a ruler, measure from the left edge of one hole to the left edge of the other, which gives the same number.

Which screws do I need?

Most US pulls use 8-32 machine screws through the drawer front. Use a length that is the drawer front's thickness plus 6 to 12 mm, so a 3/4 in front takes a 1 in screw. The screw cuts its own thread in the pilot hole; snug it, don't crank it.

Can I match the rest of my pulls?

In spacing and size, yes; set the projection and bar height to match the ones you're keeping, and pick a color. The shape is a plain bar, so for a carved or curved style use Customize more.

Is it strong enough?

For drawers, cabinet doors and closet doors, yes: the part prints lying flat, so a pull loads it along its layers, not across them. It isn't for grab bars or anything that holds a person's weight.

More in How to Measure a 3D Object for Printing: Calipers and Clearance and Can You 3D Print Threads? Threaded Holes, Taps and Heat-Set Inserts.