Wall hook
A back plate with two screw holes and a deep J hook with an upturned tip.
$9.70
Delivered. Printing starts Fri, Nov 6, at your door by Fri, Nov 13.
Shipping $5.51
Price breakdown
- Print 10.8 g, 21 min
- $4.19
- USPS Ground Advantage
- $5.51
- Total, before tax
- $9.70
46 × 76 × 22 mm
Customize more in the AI designer: change the shape, add holes or sizes, then order the same way.
What it's for
A plain, sturdy hook for an entryway, closet or garage: coats, bags, dog leashes, towels, headphones. The back plate is 70 mm tall with two screw holes; the hook reaches 25-70 mm out and turns up 18 mm at the tip so things don't slide off.
Make it wider for a heavy coat or narrower for a key ring. Use #8 or M4 screws (not included) into a stud or with wall anchors.
For hooks on a pegboard, see the pegboard hook; for a row of key pegs, the key holder.
Sizes and price
- Reach
- 25-70 mm
- Width
- 15-40 mm
- Back plate
- 70 mm tall, two 4.4 mm screw holes
- Screws
- #8 or M4 (not included)
- As shown
- 46 × 76 × 22 mm
- Material
- PLA, in black, white, gray, red, blue, green
- Price as shown
- $9.70 delivered
- Four of them
- $11.99 delivered
Prices include USPS Ground Advantage shipping anywhere in the US; sales tax is added at checkout where required. A different size or text changes the price; the panel above shows it before you order.
Questions
How much weight can it hold?
It is made for everyday things like coats, bags and leashes. It is not for hanging anything heavy or anything that could hurt someone if it fell.
Can I use it outside?
PLA softens around 55-60 °C, so not in direct summer sun or a hot garage. Indoors it lasts for years.
What screws do I need?
Two #8 or M4 screws, with drywall anchors if there's no stud behind the wall.
