Plastic spacers
Round PLA spacers for a screw size you pick, any length from 2 to 60 mm.
$9.11
Delivered. Printing starts Fri, Nov 6, at your door by Fri, Nov 13.
Shipping $5.51
Price breakdown
- Print 0.3 g, 9 min
- $3.60
- USPS Ground Advantage
- $5.51
- Total, before tax
- $9.11
7 × 7 × 10 mm
Customize more in the AI designer: change the shape, add holes or sizes, then order the same way.
What it's for
Spacers and standoffs for circuit boards, panels, brackets and furniture, in the exact length you need instead of the nearest one in a kit. Pick the screw and the hole is made with clearance for it: M3 gets 3.4 mm, M4 4.5 mm, #8 4.4 mm.
The outside diameter is up to you; the wall never gets thinner than 1.2 mm, so a small spacer on a big screw grows to stay strong. Ends are flat with a light chamfer.
One quote is one spacer. Set the quantity in the price panel: ten cost little more than one, because the order fee and shipping are shared.
Sizes and price
- Screw
- M2, M2.5, M3, M4, M5, M6, M8 or #8
- Length
- 2-60 mm in 0.5 mm steps
- Outside diameter
- 4-20 mm (at least hole + 2.4 mm)
- As shown
- 7 × 7 × 10 mm
- Material
- PLA, in black, white, gray, red, blue, green
- Price as shown
- $9.11 delivered
- Four of them
- $9.41 delivered
Prices include USPS Ground Advantage shipping anywhere in the US; sales tax is added at checkout where required. A different size or text changes the price; the panel above shows it before you order.
Questions
What tolerance should I expect?
About ±0.3 mm on length and diameter. For an exact stack, order a little short and add a washer.
Are PLA spacers strong enough?
For holding boards, panels and light brackets apart, yes. They are not for engines, heat or structural loads.
Do you make threaded standoffs?
Not in the catalog. Use Customize more and ask the AI designer for a hole sized for a heat-set insert, or upload your own file.
More in 3D Printing Tolerances: How Much Clearance Each Fit Needs (in mm) and How to Add Threads to 3D Printed Parts: Printed, Tapped or Heat-Set Inserts.
